|
|
engcon Optional grabber types 05, 10 and 20
integrated grab for installation on tiltrotators and rotators
• Grab arm in hardwearing steel for strength and low weight.
• Load valve in each grab cylinder for safe lifts.
• Grab can be adapted to specific requirements.
• The perfect assistant at your construction site.
• Deals easily with poles, curbstones etc.
• Practical for pipe and drain installation.
• Available for tiltrotator/rotator EC05, EC10, EC15, EC20 och EC30.
• 3 claws as standard.
• Meets European safety standards
engcon's tiltrotator EC30 fits machines in the weight class 22–32 tonnes, e.g. Case CX290, Cat 325, Daewoo S255, Hitachi ZX 230, JCB JS 220, Kobelco SK 250, Komatsu PC240, Liebherr R924, O&K RH8.5 and Volvo EC290
This model is delivered complete with tubes, hydraulic couplings and electrical installation equipment for one machine. The electrical system can be adapted for either 24 or 12 volt systems. The upper and lower hitches can be adapted to most machines on the market. We have an extensive database of existing hitches on the market. This tiltrotator can also be supplied with a direct attachment to the machine's stick.
All models can also be supplied with integrated grab
Download Technical Specification >> Optional Grabber (pdf)
STRATEGIC MEASUREMENTS *
| Width A: (mm) |
500 |
| Width B: (mm) |
390 |
| Width C: (mm) |
390 |
| Total length D: (mm) |
970 |
| Build height E: (mm) |
740 |
| Weight: (kg) |
From 850 |
| Tilt: |
2x40° |
| Flow requirement: l/min |
40–80 |
| Work pressure: (Mpa) |
18–21 |
| Max. return pressure: (MPa) |
2.5 |
Standard mountings:
|
S2
|
TECHNICAL INFORMATION
*
| Machine weight: (tonnes) |
22 - 32 |
| Rotation: |
Infinite |
| Oil flow: (l/m) |
40–80 |
| Rotation at 50 l/m: (rpm) |
4.1 |
| Rotation torque: (kNm) |
20.5 |
| Breakout force max.: (kNm) |
240 |
| Swivel, extra: |
3/8" |
| Double swivel: |
Extra |
| Oil flow max.: (l/m) |
55 |
Extra hydraulic coupling, hitch:
|
3/8" | |
* depending on model |
