SuperScreener - Technical Data

Trailer or semi-trailer version:

• Overall length: App. 45'-0"
• Width: App. 8’-6"
• Overall height: App. 13’-1"
• Service weight: App. 32,000 lbs.
• Hitch load: max. 2,000 lbs.

Chassis with hopper

• Rugged frame made of rectangular steel tubing sections with hopper and integrated undercarriage,
• Tire size 315 / 80 R22.5 156 / 150L, wheel base 48".
• Brake system ABS sensors.
• Lighting acc. to meet all US DOT specifications.
• Draw bar is a removable assembly with towing eye to easily adapt to local requirements.

Hopper conveyor belt

• Hopper conveyor designed as a removable assembly for easy mounting and locking in place.
• Hydraulic drive unit with infinitely variable speed adjustment mounted at hopper discharge side.
• Conveyor belt runs on spring-cushioned supporting rollers.
• Hopper charge width: 12’-6"
• Width of conveyor belt: 4’-0"

Star screen deck

• The completely pre-assembled screen deck is mounted above the fines collecting belt conveyor and secured with quick-connection clamps.
• Hydraulic lines are connected with quick couplers to facilitate screen deck replacement.
• Screen Deck utilizes a weight-optimising design to lower weight and maintain high strength.
• Screen shafts have flange bearings with all gears on one side.
• Screening deck is comprised of 3 individually driven sectional screening assemblies.
• Adjustable hydraulic drives, readily accessible at one side.
• Fine guiding baffle sheets of stainless steel, screw connections for easy removal, prepared for the installation of cleaners
• All screen shaft bearings are lubricated via a Beka-Max central lubrication system.
• Screen length: 22’-6"
• Screen width: 4’-0"
• Screen fractions: 3/8" – 2 3/8"

Collecting conveyor belt

• The collecting conveyor comprises two belt sections:
  1. Fines section (below the screen deck)
  2. Overs section (after the screen deck)
  and includes a laterally slewing fines discharge belt .
• All conveyor belts hydraulically powered with variable speed controls.
• The lateral discharge conveyor is located at the right side (travelling direction) of the machine and is retracted for road transport.
• Hydraulically adjustable discharge height.
• For road transport, the end section of the collecting conveyor is folded.
• Width of overs conveyor belt: 4’-0"
• Width of fines conveyor belts: 4’-0" / 1"
• Overs discharge height: 13’-0"
• Fines discharge height: 10’-0"

Power unit

• The power for the machine is supplied by a Caterpillar® Diesel engine, which features direct fuel injection, turbo-charger and intercooler.
• Type: 3056 DI-TA/EPA
• Power rating: 172 HP. at 2200 r.p.m.
• Number of cylinders: 6 in line
• Starter / Generator: 12V

Diesel fuel tank

• Fuel tank is integrated into the chassis between the rear axle and engine compartment with the filler neck on the left side of the machine.
• The 79 Gallon tank tank provides a sufficient supply of fuel for two typical workdays.

Engine compartment

• Aside from the Diesel engine, this compartment also houses the radiator, hydraulic valve assembly, and the engine controls.
• An on board management system monitors the operating systems and warns for such things as electrical faults, excessive engine temperature, hydraulic fluid overtemperature, insufficient cooling, etc.
• Easily accessible hydraulic valve assembly and hydraulic pressure gauges.
• The hydraulic reservoir (volume 61 Gallons) is located near the engine compartment.
• A light in the engine compartment is provided to assist with “after hours" service and maintenance.
• An onboard fire extinguisher with an A, B, C rating is standard safety equipment.

Options:

• A Remote Control Tipper grid (Grizzley), gaps adjustable from ..... to 7 7/8"
• B Remote Control Vibrating Tipper grid (Grizzley)
• C Auger at hopper discharge
• D Lifting tackle gear for screen deck replacement
• E Tool box
• F Central lubrication for screen deck
• G Adapter for onsite movement
• H Dust Control System